secuENTRY 7172 REMOTE

Switching unit for external gates or control units as a remote control

The secuENTRY 7172 Remote makes your secuENTRY locking system even more flexible. This is because the small switching unit (59 x 34 mm) functions as a remote control. For example, the secuENTRY 7172 Remote can be used to automatically trigger the motor of electronic garage doors on arrival. Furthermore, the remote control can be integrated into existing, external control units. For example, alarm systems can be activated and deactivated via the switching unit. Of course, the areas of application are even more diverse. Because the Remote 7172 is used wherever an electronic device is to be activated remotely.

The secuENTRY 7172 Remote is easily read into the system via PC software by scanning the enclosed QR code. You then assign locks to the switching unit which the Remote 7172 is to switch in future. To make the desired settings, the Remote must be in the programming state. To do this, you must close the contact between the blue connecting wire and the red positive pole for ten seconds. The device then switches to programming status for 40 seconds.

After integration into the system, the device is installed. This must be carried out in a weatherproof and tamper-proof area. Power is supplied via a stabilising power pack (voltage: 5 volts to 12 volts), which is not included in the scope of delivery. Reverse polarity protection is provided. The range of the secuENTRY 7172 Remote is up to three metres. Thanks to the encrypted radio transmission in the AES standard, all information is secure.

Technical specifications:

• Operating voltage: 5 V DC ... 12 V DC; (Power supply not included)
• Transponder: Aktiv, Smartphone
• Communication: Bluetooth 5.2
• Working distance: max. 3 m
• Output: Relay, pulse 0,5 ... 1 sec.
• Switching voltage: max. 12 V

Replacement for secuEntry 7072 Remote, p.n. 130-0007