SKL-45-TT-D

tempcsm_25-45_tt_montage_klein_02_ffeed0f685_1__1PcDgjntGRKXXI

tempcsm_al_25-14_kleiner_8e7876599d_1__7pvzp214MFo78l

Product information "SKL-45-TT-D"

Pre-assembled safety contact strip SKL-45-TT-D as a through strip including C-profile Al 25-14 (optional without) for connection to the corresponding end strip

Successor to SE 25.45 TT through strip Art. No. 114-0105 with new designation

The SKL-45-TT-D is used as a closing edge safety for pinch and shear points. It is used on gates, machines, and handling equipment to protect people and material. It consists of a contact element and an aluminum profile. The idle current principle provides continuous function monitoring. The last safety contact strip in a possible series connection receives a terminating resistor, which is continuously measured by evaluation electronics. This setup also checks the entire wiring for short circuits and wire breaks.

Through strip: Both sides pre-assembled with 2 cables (0.5 to 10 m), including C-profile (optional without)

Length: Precisely manufactured in the required length from 100 mm to a maximum of 15 m. Please specify the required length during the order process.

Technical data:

Height: 45 mm
Width: 25 mm
Switching voltage: max. 24 V
Switching current: 0.1 A at maximum voltage
Connection 1: Cable 2 x 0.25 mm², length 0.5...10 m
Connection 2: Cable 2 x 0.25 mm², length 0.5...10 m
Operating temperature: -25 °C to +55 °C
Rubber profile: TPE black, hardness approx. 68 Shore A
C-profile: Alu-C-profile AL 25-14 (optional without)
Actuation travel: 7.2 mm
Actuation force: 63.1 N
After-travel to 250 N: 19.4 mm
After-travel to 400 N: 23.6 mm

Actuation values according to DIN EN 1760-2:2001 / Measuring point 1 / 10 mm/s / 20°

Questions to the product?

Talk to us: +49 7163 93926-77
Volume discounts on request by phone

Product safety information

Sensotek GmbH • Stuttgarter Strasse 119 • 73061 Ebersbach an der Fils • Germany • info@de.sensotek.com